|
|
|
Scrubbers |
|
|
|
|
| Venturi Scrubber : |
[Product Preview] |
Venturi Scrubber is a compact scrubber. It comprises of convergent inlet section, constricted throat followed by divergent outlet section.
The scrubbing liquid is fed into the inlet section tangentially through a number of pipes & ensures that entire surface area of section is flooded with scrubbing liquid.
The dust laden gas enters the scrubber vertically from top & immediately hits the film of scrubbing water where some separation takes place. The Gas then enters the venturi throat which has annular shape. This ensures that the highest possible volume of water is taken up by gas, which becomes saturated in this area.
At the narrowest cross section of throat there is a sharp tear off edge where because of sudden change in gas speed the scrubbing water is atomized into tiny droplets. Because of high relative speed between the gas / dust mixture & the droplets the dust particles strike the droplets at high speed & are entrained by them.
|
 |
|
| |
Specification :
| Capacity |
: |
600 to 250000 cfm (1000 to 425000 m/hr.) |
| Pressure Drop |
: |
6" to 20" WC (150 to 500mm WC) |
Application :
1] Metallurgical plant, basic oxygen, metal melting & sintering furnaces.
2] Incinerators.
3] Pulp & paper mills lime sludge.
4] Chemical process plant.
5] Fly ash removal.
|
| |
| |
| |
| [Up] |
| |
|
|